Good Earth Lighting BO1065-WHG-06LF6-E

Ecolight 6-inch LED Motion Utility Light

Model: BO1065-WHG-06LF6-E | Brand: Good Earth Lighting

Invoering

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolight Battery-Operated 6-inch LED Dual Lens Motion Utility Light. Please read this manual thoroughly before using the product to ensure proper function and safety.

Veiligheidsinformatie

  • Zorg ervoor dat de batterijen met de polariteit in de juiste richting worden geplaatst.
  • Gebruik geen oude en nieuwe batterijen of verschillende soorten batterijen door elkaar.
  • Verwijder de batterijen als u de lamp gedurende langere tijd niet gebruikt.
  • This product is designed for dry locations only. Avoid exposure to water or high humidity.
  • Buiten bereik van kinderen houden.

Inhoud van het pakket

Controleer of alle componenten aanwezig zijn vóór de installatie:

  • 1 x Ecolight 6-inch LED Motion Utility Light
  • 3 x AA-batterijen (meegeleverd)
  • 4 x Small Damage-Free Picture Hanging Command Strips by 3M
Ecolight 6-inch LED Motion Utility Light packaging showing contents
Figure 1: Product packaging illustrating the included components.

Instellen en installeren

The Ecolight Motion Utility Light is designed for easy, flexible, and damage-free mounting using the included 3M Command Strips. No wiring is required.

Stap 1: Bereid het licht voor

  1. Verwijder de achterkant van de lamp.
  2. Locate and remove the clear plastic tab from the battery compartment. This activates the included AA batteries.
  3. Plaats de achtercover terug.
Bovenkant view of the Ecolight 6-inch LED Motion Utility Light
Figuur 2: Boven view of the light, showing the motion sensor and light lenses.

Stap 2: Bereid het montageoppervlak voor

  • Choose a clean, dry, and smooth surface for mounting.
  • Clean the surface with rubbing alcohol and a clean cloth. Allow it to dry completely. Do not use household cleaners.

Step 3: Apply Command Strips

  1. Separate the two interlocking strips from each pair.
  2. Firmly press two strips together until they click. Repeat for all four strips.
  3. Remove the green liner from one side of each paired strip.
  4. Apply these strips to the designated flat areas on the back of the light. Press firmly.
  5. Remove the remaining liner from the exposed side of each strip.

Step 4: Mount the Light

  • Align the light with the prepared surface.
  • Press the light firmly against the surface for 30 seconds to ensure strong adhesion.
Ecolight 6-inch LED Motion Utility Light installed under a kitchen cabinet
Figure 3: The utility light installed under a cabinet, providing illumination.

For a visual guide on installation and removal, please refer to the official product video:

Video 1: Official installation and removal guide for the Ecolight Motion Utility Light. This video demonstrates the steps for setting up and safely removing the light using Command Strips.

Gebruiksaanwijzing

The Ecolight Motion Utility Light features motion-activated operation and an auto-off timer for energy efficiency.

  • Bewegingsactivering: The integrated 100-degree Passive Infrared (PIR) sensor detects motion up to 12 feet away. The light will only activate when it is dark and motion is detected, conserving battery life.
  • Auto-uit-timer: After the light activates and no further motion is detected, it will automatically turn off after 30 seconds.

Onderhoud

Batterij vervangen

When the light output diminishes, it is time to replace the batteries.

  1. Carefully remove the light from its mounting surface. If using Command Strips, follow the removal instructions (pull tab straight down slowly).
  2. Verwijder de achterkant van de lamp.
  3. Replace the three (3) AA batteries with new ones, ensuring correct polarity (+/-).
  4. Plaats de achtercover terug.
  5. Re-mount the light using new Command Strips if necessary, following the installation steps.

The light is rated for 52 hours of illumination on a full battery charge.

Probleemoplossing

Probleem Mogelijke oorzaak Oplossing
Licht gaat niet aan. Batterijen zijn leeg of niet goed geplaatst. Vervang de batterijen en let daarbij op de juiste polariteit.
Licht gaat aan bij daglicht. Sensor is detecting insufficient ambient light. Ensure the light is installed in an area that is sufficiently dark for motion activation.
Light does not detect motion reliably. Sensor obstructed or outside detection range. Clear any obstructions from the sensor. Ensure motion occurs within 12 feet and 100 degrees of the sensor.
Het licht gaat te snel uit. No continuous motion detected within 30 seconds. This is normal operation. The light is designed to turn off after 30 seconds of no detected motion to conserve battery life.

Specificaties

  • Modelnummer: BO1065-WHG-06LF6-E
  • Afmetingen: 6 x 2.5 x 1.1 inch (L x B x H)
  • Artikelgewicht: 6.4 ons
  • Energiebron: Battery powered (3 x AA batteries, included)
  • Deeltage: 4.5 Volt (DC)
  • Wattage: 6 watt
  • Type lamp: LED
  • Lichtstroom: 80 Lumen
  • Kleurtemperatuur: 4000K (Bright, neutral white light)
  • Bewegingssensor: 100-degree PIR sensor, detects motion up to 12 ft.
  • Auto-uit-timer: 30 seconden (nadat er geen beweging meer is gedetecteerd)
  • Lamp Leven: Tot 30,000 uur
  • Levensduur batterij: Approximately 52 hours of illumination on a full charge
  • Installatiemethode: Wall-mounted (with included 3M Command Strips)
  • Gebruik: Alleen droge locatie
  • Materiaal: Plastic
  • Kleur: Wit

Garantie

This Ecolight Motion Utility Light comes with a 6 jaar beperkte garantie. For details regarding warranty coverage and claims, please refer to the product packaging or contact Good Earth Lighting customer support.

Steun

For further assistance, technical support, or inquiries, please contact Good Earth Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official webplaats.

Fabrikant: Goede aardverlichting

Webwebsite: Good Earth Lighting Store on Amazon

© 2024 Good Earth Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.