1. Inleiding
The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.
Belangrijkste kenmerken zijn:
- Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
- Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
- Belt-drive motor for stable speed and reduced vibrations.
- Integrated tonearm (CF tonearm) designed for optimal tracking.
2. Wat zit er in de doos?
Controleer bij het uitpakken of alle onderdelen aanwezig zijn en in goede staat zijn:
- Clearaudio Concept MM Turntable unit
- Pre-mounted Classic MM cartridge/stylus
- Stofkap
- Power supply unit (with cable)
- Aandrijfriem
- Schotel
Als er onderdelen ontbreken of beschadigd zijn, neem dan onmiddellijk contact op met uw dealer.
3. Installatiehandleiding
Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.
3.1 Plaatsing
Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.
3.2 Uitpakken en monteren
- Gently remove the turntable from its packaging.
- Place the main plinth on your chosen surface.
- Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
- Bevestig de aandrijfriem rond de motorpoelie en de binnenrand van de draaischijf.
- Plaats de stofkap over de draaitafel.
3.3 Tonearm and Cartridge Adjustment
Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.
- Volgkracht: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
- Anti-skating: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
- VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.
Figuur 3.1: Overview of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.
3.4 Connectiviteit
Connect the turntable to your audio system:
- Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preampverliezer.
- Sluit de aardingsdraad van de draaitafel aan op de aardingsaansluiting van uw apparaat. amplifier of phono preamplifier to minimize hum.
3.5 Stroomaansluiting
Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.
4. Gebruiksaanwijzing
4.1 In-/uitschakelen
Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.
4.2 Snelheidsselectie
The Clearaudio Concept MM Turntable supports multiple playback speeds:
- 33 ⅕ RPM: For standard LPs (Long Play records).
- 45 tpm: For singles and some audiophile pressings.
- 78 tpm: For shellac records (requires a dedicated 78 RPM stylus, not included).
Select the appropriate speed using the control knob on the plinth.
4.3 Een plaat afspelen
- Leg een plaat op de schaal.
- Select the correct playback speed.
- Til de toonarm omhoog met behulp van de cueinghendel.
- Plaats de toonarm voorzichtig boven de gewenste begingroef van de plaat.
- Laat de cueinghendel voorzichtig zakken zodat de naald op de plaat kan neerdalen.
- Pas het volume aan op uw ampverliezer.
4.4 Afspelen stoppen
- Til de toonarm omhoog met behulp van de cueinghendel.
- Zet de toonarm terug in de ruststand.
- Laat de cue-hendel zakken.
- Turn the speed selection knob to the 'Off' position to power down the turntable.
- Replace the dust cover to protect the turntable from dust.
5. Onderhoud
Regular maintenance will ensure the longevity and optimal performance of your turntable.
- Stofkap: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
- Cleaning the Plinth and Platter: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
- Reinigen van de stylus: Gently clean the stylus regularly using a dedicated stylus brush or cleaning fluid. Always brush from back to front.
- Aandrijfriem: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
- Patroonvervanging: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.
6. Probleemoplossing
Hier zijn enkele veelvoorkomende problemen en hun mogelijke oplossingen:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Geen geluid of heel zacht geluid | Verkeerde invoer geselecteerd op amplifier; cables loose; no phono preamplifier (if needed); ampHet volume van de versterker staat te laag. | Ensure "Phono MM" input is selected. Check all cable connections. Use a phono preampversterker als uw amplifier lacks a dedicated phono input. Increase amphet volume van de verliezer. |
| Brommend of zoemend geluid | Ground wire not connected; poor cable shielding; proximity to other electronics. | Ensure ground wire is securely connected. Use high-quality shielded RCA cables. Move turntable away from other electronic devices. |
| Vervormd geluid of overslaan | Incorrect tracking force; incorrect anti-skating; dirty stylus; damaged record; turntable not level. | Re-adjust tracking force (ensure measurement at platter height). Adjust anti-skating. Clean stylus. Inspect record for damage. Ensure turntable is perfectly level. |
| Onjuiste afspeelsnelheid | Wrong speed selected; worn drive belt. | Verify the correct speed (33, 45, or 78 RPM) is selected. Inspect and replace the drive belt if necessary. |
If the problem persists, please contact your authorized Clearaudio dealer or support.
7. Specificaties
| Merk | Helderaudio |
| Modelnaam | Concept TP053 |
| Modelnummer | CONCEPT MM TP053 |
| Connectiviteitstechnologie | Hulp |
| Compatibele apparaten | Amplifier, AV Receiver, Active Speakers, various audio components |
| Speciale functie | MC System (Note: Product is MM, but system supports MC cartridges) |
| Meegeleverde componenten | Cartridge/stylus, Dust cover |
| Vermogenstype | Bedraad |
| Materiaal | High-quality alloy or engineered wood |
| Kleur | Zwart |
| Motortype | Motor met riemaandrijving |
8. Garantie en ondersteuning
For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.
For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio webwebsite voor contactgegevens.
