Argox AS8520

Argox AS8520 Barcode Scanner User Manual

1. Inleiding

The Argox AS8520 is a high-performance cordless imager designed for efficient barcode scanning. It features advanced wireless communication technology, allowing for a data transmission range of up to 100 meters. Equipped with a long-lasting Li-ion battery and an IP42 sealing level, the AS8520 is built for durability and mobility across various environments, including offices, supermarkets, warehouses, and manufacturing facilities.

2. Product voorbijview

The AS8520 barcode scanner is designed for comfortable handling and robust performance. Key components include the scanning window, trigger button, and ergonomic grip.

Argox AS8520 Barcode Scanner side view

Figuur 2.1: Kant view of the Argox AS8520 Barcode Scanner, showing the ergonomic handle and trigger button.

Argox AS8520 Barcode Scanner front view

Figuur 2.2: Voorkant view of the Argox AS8520 Barcode Scanner, highlighting the scanning window and product labels.

3. Installatiehandleiding

3.1. Batterij installeren en opladen

  1. Ensure the scanner is powered off before installing or removing the battery.
  2. Locate the battery compartment on the scanner handle.
  3. Insert the Li-ion battery pack, ensuring correct polarity.
  4. Sluit het batterijvak goed af.
  5. Connect the scanner to its charging base or power adapter using the provided cable. Allow the battery to fully charge before first use.

3.2. Verbinding maken met een hostapparaat

The Argox AS8520 can connect wirelessly to various host devices, including desktops, laptops, and smartphones. Refer to the separate quick start guide for specific pairing instructions for your operating system or device type.

4. Gebruiksaanwijzing

4.1. Basisscannen

  1. Zorg ervoor dat de scanner is ingeschakeld en succesvol is gekoppeld aan uw hostapparaat.
  2. Point the scanning window towards the barcode you wish to scan.
  3. Press and hold the trigger button. A red LED light source (630nm Visible Red LED) will illuminate the barcode.
  4. Position the scanner at an appropriate distance (the AS8520 offers superior depth of field up to 40 inches on 40-mil codes) until the barcode is successfully read. A successful scan is typically indicated by an audible beep and/or a visual indicator.
  5. Laat de trekkerknop los.

4.2. Geavanceerde scanfuncties

  • Rapid Scan Rate: The AS8520 provides a rapid scan rate of 450 scans/sec for efficient data capture.
  • Barcode Symbology Support: Supports GS1 Databar (RSS) and CS (Composite Symbology) barcodes.
  • Sunlight Readability: Designed to be readable under direct sunlight conditions.

5. Onderhoud

5.1. De scanner reinigen

  • Zorg ervoor dat de scanner is uitgeschakeld voordat u hem schoonmaakt.
  • Gebruik lichtjes een zachte, pluisvrije doek dampened with water or a mild cleaning solution to wipe the exterior of the scanner.
  • Gebruik voor het scanvenster een lensreinigingsdoekje om krassen te voorkomen.
  • Do not use abrasive cleaners, solvents, or immerse the scanner in liquid. The IP42 sealing level protects against dust and light water splashes, but not full immersion.

5.2. Batterijverzorging

  • To maximize battery life, avoid fully discharging the Li-ion battery frequently.
  • Bewaar de scanner op een koele, droge plaats wanneer u deze gedurende langere tijd niet gebruikt.
  • If the battery performance degrades significantly, consider replacing it with an authorized Argox replacement battery.

6. Probleemoplossing

ProbleemMogelijke oorzaakOplossing
Scanner gaat niet aan.De accu is leeg of niet correct geïnstalleerd.Laad de batterij op. Zorg ervoor dat de batterij correct in het batterijcompartiment is geplaatst.
De scanner leest geen barcodes.Barcode is damaged, scanner is too far/close, or incorrect symbology settings.Ensure the barcode is clear. Adjust scanning distance. Check scanner programming for supported barcode types.
No data transmitted to host device.Scanner not paired or out of range.Re-pair the scanner with the host device. Ensure the scanner is within the 100-meter transmission range.
Scanner is unresponsive.Tijdelijke softwarestoring.Perform a soft reset by powering off and then on the scanner. If issues persist, consult the manufacturer's support.

7. Technische specificaties

FunctieSpecificatie
ModelAS8520
Scansnelheid450 scans/sec
Lichtbron630nm Visible Red LED
ScanprestatiesStarting at 0.1mm (4 mil)
ScherptediepteUp to 40 inches on 40-mil codes
Bereik gegevensoverdracht100 meters (wireless)
Compatibele apparatenBureaublad, laptop, smartphone
EnergiebronBattery Powered (Li-ion battery pack)
Bedrijfstemperatuur0°C tot 50°C (32°F tot 122°F)
Opslagtemperatuur-20°C tot 70°C (-4°F tot 158°F)
Vochtigheid10% tot 90% relatieve vochtigheid, niet-condenserend
LichtniveauTot 70,000 lux
Current - Operating225 mA bij 4.2 VDC
Current - Standby32 mA bij 4.2 VDC
Power - Operating900mW
Power - Standby150mW
Reliability (Trigger)1,000,000 keer
Reliability (Cable)320,000 times (90° bend)
Drop-specificatie1.5 meter
AfdichtingsniveauIP42
Artikelgewicht1.3 kg
GTIN/UPC702563636336

8. Garantie en ondersteuning

For detailed warranty information, please refer to the warranty card included with your product or visit the official Argox website. For technical support, service, or replacement parts, please contact your authorized Argox reseller or Argox customer service directly.

© 2026 Argox. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.