1. Inleiding
The CyberPower BRG1500AVRLCD Intelligent LCD UPS System is designed to provide reliable battery backup and surge protection for desktop computers, workstations, networking devices, and home entertainment systems. This Uninterruptible Power Supply (UPS) system utilizes line interactive topology and simulated sine wave output to safeguard your valuable electronics from power interruptions and fluctuations.
Key features include Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, thereby extending battery life. It also offers two USB charge ports (2.1 Amps shared) for portable devices.
Figure 1: CyberPower BRG1500AVRLCD UPS System in a typical office environment, providing power protection to connected devices.
2. Veiligheidsmaatregelen
Lees en volg alle veiligheidsinstructies zorgvuldig door voordat u de UPS installeert of in gebruik neemt. Het niet opvolgen hiervan kan leiden tot schade aan het apparaat, aangesloten apparatuur of persoonlijk letsel.
- Do not install the UPS in direct sunlight, near heat-emitting appliances, or in areas with excessive humidity.
- Ensure the UPS is connected to a grounded outlet.
- Open de UPS-behuizing niet.asing. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
- Gebruik de UPS niet voor medische of levensondersteunende apparatuur.
- Ensure proper ventilation around the UPS. Do not block any ventilation openings.
- In case of fire, use a powder fire extinguisher. Do not use water.
3. Inhoud van het pakket
Controleer of alle artikelen in het pakket aanwezig zijn:
- UPS-eenheid
- Gebruiksaanwijzing
4. Product voorbijview
4.1 Voorpaneel
Figuur 2: Voorzijde view of the CyberPower BRG1500AVRLCD UPS, highlighting the Intelligent LCD panel and USB charging ports.
The front panel features the Intelligent LCD display, control buttons (Display, Mute, Enter, Setup), and two USB charge ports (USB-A and USB-C) for convenient charging of portable devices.
4.2 Achterpaneel
Afbeelding 3: Achter view of the CyberPower BRG1500AVRLCD UPS, detailing the NEMA 5-15R outlets, network, cable, and serial ports.
The rear panel includes 12 NEMA 5-15R outlets: six battery backup & surge protected outlets and six surge protected outlets. It also features network (RJ45) and cable (Coax) surge protection ports, a serial port, and a USB port for management software connectivity. A circuit breaker reset button is also located on the rear panel.
5. Instellen
5.1 Eerste keer opladen
Before initial use, plug the UPS into a grounded wall outlet and allow it to charge for at least 8 hours to ensure maximum battery runtime. The unit will automatically turn on when connected to mains power.
5.2 Apparatuur aansluiten
- Batterijback-up en stopcontacten met overspanningsbeveiliging: Connect critical equipment such as your computer, monitor, and external hard drives to these outlets. These devices will receive power from the UPS battery during an outage.
- Stopcontacten met overspanningsbeveiliging: Connect non-critical equipment that still requires surge protection, such as printers or scanners, to these outlets. These devices will not receive battery backup power.
- USB-oplaadpoorten: Use the front USB-A and USB-C ports to charge mobile phones, MP3 players, and cameras.
- Bescherming van datalijnen: Connect your network cable (RJ45) and coaxial cable (Coax) through the designated IN/OUT ports on the rear panel to protect against surges.
6. Gebruiksaanwijzing
6.1 Turning On/Off the UPS
- Aanzetten: Press and hold the Power button on the front panel for approximately 2 seconds. The LCD display will light up.
- Uitschakelen: Press and hold the Power button for approximately 2 seconds. The LCD display will turn off.
6.2 LCD-displayfuncties
The multifunction LCD panel displays immediate, detailed information on battery and power conditions. Use the 'Display' button to cycle through various screens:
Afbeelding 4: Examples of information displayed on the Intelligent LCD panel, including input/output voltage, belasting en batterijstatus.
- Ingangsvolumetage: Toont het huidige volumetage from the utility power.
- Uitgangsvolumetage: Toont de voltage wordt door de UPS aan de aangesloten apparatuur geleverd.
- Batterijcapaciteit: Indicates the current charge level of the internal batteries.
- Laadvermogen: Geeft het percentage weertage of the UPS's capacity being used by connected equipment.
- Geschatte looptijd: Provides an estimate of how long the UPS can supply power during an outage based on the current load.
- Logboek: Records power events such as outages, pieken en voltage fluctuaties.
6.3 Automatisch voltage Regeling (AVR)
De UPS beschikt over automatische volumeregeling.tage Regulation (AVR), which automatically corrects minor power fluctuations (sags and overvoltages) without switching to battery power. This extends the life of the battery by reducing the number of times it needs to discharge and recharge.
6.4 PowerPanel Personal Edition Management Software
The UPS comes with FREE PowerPanel Personal Edition Management Software (Download). This software allows for advanced power management features, including scheduled shutdowns, remote monitoring, and customizable alerts. Refer to the software's documentation for installation and usage instructions.
7. Onderhoud
7.1 Batterij vervangen
The CyberPower BRG1500AVRLCD uses two 12V batteries. The batteries are designed to last approximately 3-5 years under normal operating conditions. When the batteries reach the end of their service life, they should be replaced by qualified personnel. For battery replacement, contact CyberPower Systems customer support or a certified technician.
7.2 Reinigen
Reinig de buitenkant van de UPS regelmatig met een droge doek. Zorg ervoor dat de ventilatieopeningen vrij zijn van stof en vuil om een goede luchtcirculatie te garanderen en oververhitting te voorkomen.
8. Probleemoplossing
If the UPS is not functioning correctly, refer to the following common issues:
- De UPS gaat niet aan: Ensure the power cord is securely plugged into a grounded wall outlet and the UPS. Check the circuit breaker on the rear panel and reset if tripped.
- De UPS geeft continu een pieptoon: This usually indicates the UPS is operating on battery power during an outage or a low battery condition. Save your work and shut down connected equipment if the outage is verlengd.
-
Gerelateerde documenten - BRG1500AVRLCD
CyberPower UPS-functie-installatiehandleiding
Detailed guide for setting up functions and configurations on CyberPower Intelligent LCD UPS Systems, including voltage settings, sensitivity, alarms, and display options.
Gebruikershandleiding CyberPower BRG1500AVRLCD2 UPS: Functies, installatie en bediening
Uitgebreide gebruikershandleiding voor de CyberPower BRG1500AVRLCD2 intelligente LCD UPS. Lees meer over de functies, installatie, basisbediening, batterijvervanging, probleemoplossing en technische specificaties.
CyberPower PR750LCD3C Intelligent UPS Series User Manual
User manual for the CyberPower PR750LCD3C Intelligent UPS Series, providing detailed information on installation, operation, safety warnings, troubleshooting, and technical specifications for this Uninterruptible Power Supply.
CyberPower Intelligent UPS-serie OR1000LCDRM1U/OR1500LCDRM1U Gebruikershandleiding | Stroombeveiligingsgids
Uitgebreide gebruikershandleiding voor de CyberPower Intelligent UPS-serie (OR1000LCDRM1U, OR1500LCDRM1U). Lees meer over installatie, functies, bediening, batterijvervanging, probleemoplossing, technische specificaties en veiligheid voor betrouwbare stroombeveiliging.
Gebruikershandleiding CyberPower Intelligent UPS-serie - CP850/1000/1350/1500AVRLCD
Gebruikershandleiding voor de CyberPower Intelligent UPS-serie modellen CP850AVRLCD, CP1000AVRLCD, CP1350AVRLCD en CP1500AVRLCD. Behandelt functies, veiligheid, installatie, bediening, batterijvervanging, probleemoplossing, technische specificaties en GreenPower UPS-technologie.
CyberPower PR5000RTXL2UC Smart App Sinewave UPS Series User Manual
Comprehensive user manual for the CyberPower PR5000RTXL2UC Smart App Sinewave UPS Series. Covers installation, basic and network operation, LCD settings, EPO/ROO configuration, dry contact monitoring, battery replacement, technical specifications, troubleshooting, and warranty information.