HOTONE TANLA1

Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Hoofd Gebruikershandleiding

Model: TANLA1 | Brand: HOTONE

1. Inleiding

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Belangrijkste kenmerken:

  • Ultra-compact, portable amplijder hoofd.
  • Inspired by the legendary Vox AC30 amplifier tone.
  • Separate Volume and Gain control knobs.
  • 3-bands EQ (bas, midden, hoog) voor toonvorming.
  • Integrated FX Loop for external effects integration.

2. Veiligheidsinstructies

  • Voeding: Use only the specified 18V DC power adapter (center negative). Incorrect voltagWe kunnen het apparaat beschadigen.
  • Ventilatie: Zorg voor voldoende ventilatie. Blokkeer de ventilatieopeningen niet.
  • Vocht: Keep the unit away from water or excessive moisture.
  • Warmte: Plaats het apparaat niet in de buurt van warmtebronnen of in direct zonlicht.
  • Schoonmaak: Alleen schoonmaken met een droge doek.
  • Onderhoud: Probeer dit apparaat niet zelf te repareren. Laat alle onderhoudswerkzaamheden uitvoeren door gekwalificeerd personeel.

3. Product voorbijview

Hotone Nano Legacy British Invasion Amplifier Hoofd

Afbeelding: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Bedieningselementen op het voorpaneel:

Hotone Nano Legacy British Invasion Front Panel Diagram

Afbeelding: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

  1. INVOER: 1/4" mono jack for connecting your guitar.
  2. BAS: Controls the low frequency response of your tone.
  3. MIDDEN: Controls the mid frequency response of your tone.
  4. driedubbel: Controls the high frequency response of your tone.
  5. VERDIENEN: Controls the pre-amp gain level, affecting distortion and sustain.
  6. VOLUME: Regelt het algehele uitgangsvolume van de ampverliezer.
  7. Aan / uit knop: Hiermee schakelt u het apparaat in of uit.

Aansluitingen op het achterpaneel:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Afbeelding: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

  1. 18V gelijkstroom: Power input for the included 18V DC adapter (center negative).
  2. TELEFOONS/LIJNUITGANG: 1/8" stereo jack for headphones or direct recording.
  3. AUX-IN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
  4. FX LOOP RETOUR: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
  5. LUIDSPREKERUITGANG: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
  6. FX LOOP VERZENDEN: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Installatie en verbindingen

  1. Stroomaansluiting: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
  2. Gitaarverbinding: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
  3. Luidsprekeraansluiting: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Waarschuwing: Gebruik de amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
  4. Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
  5. AUX-ingang (optioneel): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
  6. FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Gebruiksaanwijzing

  1. Inschakelen: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
  2. Oorspronkelijke instellingen: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
  3. Aanwinst aanpassen: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
  4. Volume aanpassen: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
  5. Klankvorming met EQ:
    • BAS: Adjust for low-end warmth and fullness.
    • MIDDEN: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
    • driedubbel: Adjust for brightness and clarity.
  6. Uitschakelen: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Onderhoud

  • Schoonmaak: Gebruik een zachte, droge doek om de buitenkant van het apparaat schoon te maken ampversterker. Gebruik geen vloeibare reinigingsmiddelen, spuitbussen of oplosmiddelen.
  • Opslag: Bewaar de ampBewaar de verdamper op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
  • Vervoer: Zorg er bij het transport voor dat... ampDe versterker is stevig verpakt om fysieke schade te voorkomen.
  • Kabelonderhoud: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Probleemoplossing

ProbleemMogelijke oorzaakOplossing
Geen geluidsuitvoer
  • Stroom niet aangesloten of ingeschakeld.
  • Guitar cable faulty or not fully inserted.
  • Speaker cable faulty or not fully inserted.
  • Impedantieverschil tussen luidsprekers.
  • Volume/Gain knobs set to minimum.
  • Headphones connected to PHONES/LINE OUT.
  • Check power connection and ON/OFF switch.
  • Ensure guitar cable is secure and functional.
  • Ensure speaker cable is secure and functional.
  • Verify speaker impedance is 4-16Ω.
  • Increase Volume and Gain.
  • Disconnect headphones if using speaker output.
Overmatig gezoem of ruis
  • Faulty power supply or ground loop.
  • Hoge versterkingsinstellingen.
  • Interferentie van andere elektronische apparaten.
  • Single-coil pickups (inherently more susceptible to hum).
  • Try a different power outlet or a high-quality isolated power supply.
  • Verlaag de versterkingsinstellingen.
  • Beweging ampHoud de ontvanger uit de buurt van andere elektronica.
  • Consider using humbucker pickups or a noise gate pedal.
Vervormd of zwak geluid
  • Defecte kabels.
  • Onjuiste luidsprekeraansluiting.
  • Beschadigde luidspreker.
  • Ingangssignaal te sterk.
  • Controleer de kabels en vervang ze indien nodig.
  • Ensure speaker cable is correctly connected and speaker impedance is correct.
  • Test indien mogelijk met een andere luidspreker.
  • Reduce output from guitar or preceding pedals.

8. Specificaties

Model:TANLA1
Uitgang Wattage:5 Watt
Energiebron:Corded Electric (18V DC, center negative)
Compatibele apparaten:Gitaar
Aansluittype:1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Artikelgewicht:15.5 ounces (ongeveer 440 gram)
Productafmetingen:2.34 x 5.03 x 2.95 inch (ongeveer 5.9 x 12.8 x 7.5 cm)
Materiaalsoort:Roestvrij staal
Kleur:Zwart

9. Garantie-informatie

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webwebsite. Bewaar uw aankoopbewijs voor garantieclaims.

10. Klantenservice

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone webplaats.

Visit Hotone Audio Support Page (Examp(de link, de daadwerkelijke link kan variëren)

© 2024 HOTONE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.