1. Inleiding
Thank you for choosing the Einhell TH-MS 2513 T Miter and Table Saw. This versatile power tool is designed for precise cutting of wood, plastic, and non-ferrous metals, offering both miter saw and table saw functionalities. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your saw. Please read these instructions carefully before first use and keep them for future reference.
Figuur 1: Overview of the Einhell TH-MS 2513 T Miter and Table Saw.
2. Veiligheidsinstructies
Neem altijd de volgende veiligheidsmaatregelen in acht om elektrische schokken, brand en ernstig letsel te voorkomen:
- Lees de volledige handleiding: Lees alle instructies en waarschuwingen aandachtig door voordat u de zaag in gebruik neemt.
- Draag persoonlijke beschermingsmiddelen (PBM's): Always wear safety glasses, hearing protection, and a dust mask. Use gloves when handling saw blades.
- Houd uw werkplek schoon en goed verlicht: Rommelige of donkere ruimtes vragen om ongelukken.
- Niet gebruiken in explosiegevaarlijke omgevingen: Gebruik geen elektrisch gereedschap in de buurt van brandbare vloeistoffen, gassen of stof.
- Beveilig het werkstuk: Altijd clamp Of houd het werkstuk stevig vast om beweging tijdens het snijden te voorkomen.
- Gebruik het juiste mes: Ensure the saw blade is sharp, clean, and suitable for the material being cut. Never use damaged or dull blades.
- Zorg voor een goede voet en balans: Ga niet te ver.
- Stroom uitschakelen: Always unplug the saw before making adjustments, changing accessories, or performing maintenance.
- Houd de bewakers op hun plaats: Gebruik de zaag nooit zonder dat alle beschermkappen correct zijn gemonteerd en functioneren.
- Voorkom onbedoeld starten: Zorg ervoor dat de schakelaar in de uit-stand staat voordat u het apparaat aansluit.
3. Instellen
3.1 Uitpakken en inspectie
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Do not operate the saw if any parts are damaged or missing. Contact customer support immediately.
3.2 Montage
The Einhell TH-MS 2513 T requires minimal assembly. Ensure all included components, such as the push stick and any necessary guards, are properly attached according to the diagrams in the separate assembly guide (if provided). The work table is made of lightweight and stable cast aluminum, designed for precise work.
3.3 Installatie van het zaagblad
- Stroom uitschakelen: Zorg ervoor dat de zaag niet is aangesloten op het stroomnet.
- Open mesbescherming: Carefully lift or open the blade guard to access the blade arbor.
- Installeer het mes: Place the saw blade (Ø 250 x Ø 30 x 2.8 mm, 36 teeth) onto the arbor, ensuring the rotation direction indicated on the blade matches the arrow on the saw.
- Secure blade: Fasten the blade with the provided washer and arbor nut, tightening securely.
- Close guard: Plaats de mesbeschermer terug in de oorspronkelijke positie.
Figure 2: Saw blade and protective guard in miter saw configuration.
4. Gebruiksaanwijzing
4.1 Algemene werking
Before starting, ensure your workpiece is stable and properly supported. Always allow the blade to reach full speed before beginning a cut. Feed the material slowly and steadily. Never force the saw.
4.2 Miter Saw Function
The miter saw function allows for precise cross-cuts and miter cuts. Adjust the miter angle by loosening the locking knob, setting the desired angle (-45°/0°/+45°), and re-tightening the knob. For bevel cuts, adjust the saw head tilt. Ensure the workpiece is firmly against the fence.
- Snijcapaciteit bij 90°: 130x75mm
- Snijcapaciteit bij 45°: 120x50mm
- Cutting Capacity at 2 x 45° (Compound Miter): 70x35mm
Figure 3: Adjusting the miter angle for precise cuts.
4.3 Table Saw Function
To use the saw as a table saw, lock the saw head in the upright position. Adjust the cutting height (0–40 mm) using the height adjustment mechanism. Use the parallel fence for rip cuts and the push stick for feeding smaller workpieces. The table surface measures 416 x 352 mm.
Figure 4: Adjusting the cutting height for table saw operation.
4.4 Stofafzuiging
The saw is equipped with a dust funnel behind the saw blade for improved sawdust collection. Connect a suitable dust extractor to the dust port to maintain a clean work environment and improve visibility during operation.
Figure 5: Dust extraction port for connecting a vacuum system.
5. Onderhoud
Regelmatig onderhoud zorgt voor een lange levensduur en een veilige werking van uw zaag.
- Schoonmaak: After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air. Do not use solvents that could damage plastic parts.
- Bladinspectie: Controleer het zaagblad regelmatig op scherpte, scheuren of ontbrekende tanden. Vervang botte of beschadigde zaagbladen onmiddellijk.
- Beveiligingsfunctionaliteit: Ensure all guards move freely and return to their protective positions.
- Smering: Apply a light coat of machine oil to moving parts as recommended in the full manual (if applicable).
- Stroomkabel: Check the power cord for damage. Do not use the saw if the cord is frayed or cut.
6. Probleemoplossing
In dit gedeelte worden veelvoorkomende problemen besproken. Voor problemen die hier niet worden vermeld, kunt u contact opnemen met de klantenservice.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Zaag start niet | Geen stroomtoevoer; defecte schakelaar; thermische overbelastingsbeveiliging geactiveerd. | Check power connection; test switch; allow motor to cool down. |
| Slechte snijkwaliteit / Brandend hout | Dull or dirty blade; incorrect blade for material; feeding too fast. | Replace or clean blade; use appropriate blade; reduce feed rate. |
| Overmatige trillingen | Los mes; beschadigd mes; instabiele bevestiging. | Tighten blade nut; replace blade; ensure saw is securely mounted. |
| Stofafzuiging is niet effectief | Stofafvoer verstopt; stofafzuiger niet krachtig genoeg; slang losgekoppeld. | Clear dust port; use a more powerful extractor; check hose connections. |
7. Technische specificaties
| Specificatie | Waarde |
|---|---|
| Modelnummer | 4300345 |
| Stroomverbruik | 1800 W |
| Snelheid zonder belasting | 4500 minuten-1 |
| Saw Blade Dimensions | Ø 250 x Ø 30 x 2.8 mm |
| Aantal tanden | 36 |
| Verstekhoekverstelling | -45° / 0° / +45° |
| Cutting Width at 90° | 130x75mm |
| Cutting Width at 45° | 120x50mm |
| Cutting Width at 2 x 45° | 70x35mm |
| Table Saw Surface | 416x352mm |
| Table Saw Cutting Height | 0 – 40mm |
| Deeltage | 230V |
| Artikelgewicht | 14 kg |
| Productafmetingen (L x B x H) | 54.5x47x37.5cm |
| Aanbevolen oppervlak | Hout, metaal, kunststof |
8. Garantie en ondersteuning
8.1 Garantie
This Einhell product comes with a 2 jaar garantie from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in material and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear.
8.2 Klantenservice
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer support. You can find contact information on the official Einhell webwebsite of via uw lokale verkoper.
Webwebsite: www.einhell.com
Please have your model number (4300345) and serial number (if applicable) ready when contacting support.