1. Inleiding
Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.
2. Algemene veiligheidsinstructies
Always observe the following safety precautions when using power tools:
- Veiligheid werkgebied: Houd de werkruimte schoon en goed verlicht. Rommelige of donkere ruimtes zijn een risico op ongelukken. Gebruik geen elektrisch gereedschap in explosieve atmosferen, zoals in de buurt van ontvlambare vloeistoffen, gassen of stof.
- Elektrische veiligheid: Stekkers van elektrisch gereedschap moeten in het stopcontact passen. Wijzig de stekker nooit op enigerlei wijze. Vermijd lichamelijk contact met geaarde oppervlakken zoals leidingen, radiatoren, fornuizen en koelkasten.
- Persoonlijke veiligheid: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
- Gebruik en onderhoud van gereedschap: Forceer het elektrische gereedschap niet. Gebruik het juiste elektrische gereedschap voor uw toepassing. Haal de stekker uit het stopcontact voordat u aanpassingen uitvoert, accessoires verwisselt of elektrisch gereedschap opbergt.
- Dienst: Laat uw elektrisch gereedschap onderhouden door een gekwalificeerde reparateur die uitsluitend identieke vervangende onderdelen gebruikt. Dit zorgt ervoor dat de veiligheid van het elektrisch gereedschap behouden blijft.
3. Productcomponenten
Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:
- SDS Plus boorkop
- Hulphandgreep
- Diepteaanslag
- Mode Selector Switch (Drill, Hammer Drill, Chisel)
- Rotation Direction Switch (Forward/Reverse)
- On/Off Trigger with Speed Control
- Vergrendelknop (voor continu gebruik)
Figuur 1: Overview of the Einhell TC-RH 800 E Rotary Hammer.
Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.
Figuur 3: Close-up view of the SDS Plus chuck, designed for quick and secure bit changes.
Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.
Figure 5: The ergonomic main handle designed for comfortable and secure grip.
Figure 6: The adjustable depth stop, used to set a precise drilling depth.
Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.
4. Instellen
4.1 Het hulphandvat bevestigen
The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.
4.2 De dieptebegrenzer installeren
Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.
Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.
4.3 Inserting SDS Plus Drill Bits/Chisels
- Clean the shank of the drill bit or chisel and apply a thin layer of grease.
- Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
- Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.
5. Gebruiksaanwijzing
5.1 Modusselectie
The mode selector switch allows you to choose the appropriate operating mode:
- Boren (alleen rotatie): For drilling in wood, metal, or plastics.
- Hamerboren (rotatie met slag): For drilling in concrete and masonry.
- Beitelen (alleen slagkracht): For light chiseling work, such as removing tiles or plaster.
To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.
5.2 In-/uitschakelen en snelheidsregeling
Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.
5.3 Draairichting
Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.
6. Onderhoud
Regelmatig onderhoud zorgt ervoor dat uw boorhamer lang meegaat en optimaal presteert.
- Schoonmaak: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp lap. Gebruik geen agressieve schoonmaakmiddelen of oplosmiddelen.
- Onderhoud van de klauw: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
- Snoerinspectie: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
- Opslag: Store the tool in its original case in a dry, secure place, out of reach of children.
7. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Gereedschap start niet. | Geen stroomvoorziening. Netsnoer beschadigd. De aan/uit-schakelaar is defect. | Controleer het stopcontact en de stroomonderbreker. Have cord replaced by a qualified technician. Neem contact op met de klantenservice. |
| Verminderde boor-/hamerprestaties. | Versleten boor/beitel. Verkeerde modus geselecteerd. Chuck dirty or dry. | Vervang deze door een scherpe, geschikte boor. Selecteer de juiste bedrijfsmodus. Clean and grease the chuck and bit shank. |
| Gereedschap oververhit. | Ventilatieopeningen verstopt. Het gereedschap overbelasten. | Maak de ventilatiesleuven schoon. Reduce pressure and allow the tool to cool. Avoid continuous heavy use. |
8. Technische specificaties
| Functie | Specificatie |
|---|---|
| Merk | Eenheid |
| Modelnummer | TC-RH 800 E (4257920) |
| Energiebron | Elektrische kabel |
| Maximaal vermogen | 800 W |
| Impactenergie | 2.5 J |
| Deeltage | 230V |
| Huidige intensiteit | 3.33 Een |
| Maximale rotatiesnelheid | 1000 toeren per minuut |
| Aantal slagen | 5180 BPM |
| Type boorkop | SDS-Plus |
| Maximale boorkopmaat | 26mm |
| Boorcapaciteit (Beton) | 26mm |
| Boorcapaciteit (Hout) | 26mm |
| Boorcapaciteit (metaal) | 26mm |
| Maximaal koppel | 30Nm |
| Aantal snelheden | 1 |
| Productafmetingen (L x B x H) | 40x10.5x35.5cm |
| Artikelgewicht | 3.27 kg |
| Kleur | Rood |
| Materiaalsoort | Metaal, kunststof |
| Meegeleverde componenten | Carrying case, Depth stop |
9. Garantie-informatie
Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webplaats.
10. Ondersteuning
Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official website voor verdere hulp en informatie.
Officieel Webwebsite: www.einhell.com