TELEVE 5363

Televes 5363 Multiband Amplifier Gebruikershandleiding

Model: 5363 | Merk: TELEVES

1. Inleiding

The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.

Belangrijkste kenmerken:

  • Breedband amplificatie.
  • Incorporates switched-mode power supplies.
  • Allows mixing of MATV signals via an independent input.
  • Compacte afmetingen: 180 x 110 x 55 mm.
  • High-shielding chassis, manufactured from Zamak.
  • Verschillend amplification with very low noise figure, preserving signal quality.
  • Ultra-reduced ergonomic design.
Televes 5363 Multiband Amplier, achter view showing multiple F-connectors for inputs and outputs.

Afbeelding 1: Achter view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.

2. Veiligheidsinformatie

Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

  • Voeding: Zorg ervoor dat het apparaat is aangesloten op een stopcontact met het juiste volume.tage and frequency as specified in the technical specifications.
  • Ventilatie: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
  • Vocht: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp omgevingen.
  • Schoonmaak: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
  • Onderhoud: Probeer dit product niet zelf te onderhouden. Laat al het onderhoud over aan gekwalificeerd onderhoudspersoneel.
  • Montage: Ensure the device is securely mounted on a stable surface to prevent it from falling.

3. Inhoud van het pakket

Controleer of alle artikelen in het pakket aanwezig zijn:

  • Televes 5363 Multiband Ampverliezer
  • Power cable (integrated or separate, depending on model variant)
  • Gebruiksaanwijzing (dit document)
  • Montageaccessoires (schroeven, pluggen)

4. Installatie en installatie

De Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:

4.1. Montage van de Ampverliezer

  1. Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
  2. Mark the positions for the mounting screws on the wall or surface.
  3. Boor indien nodig voorboorgaten en plaats pluggen.
  4. Beveilig de amplifier using appropriate screws.

4.2. Connecting Signals

De amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.

Close-up of the Televes 5363 amplifier inputs, showing SAT, UHF, and VHF connections and switches.

Figure 2: Detail of the input connections and configuration switches on the Televes 5363 ampverliezer.

  1. VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
  2. SAT Input: Connect your satellite dish signal cable to the designated SAT input.
  3. Uitvoer: Sluit de uitgang van de . aan amplifier to your SMATV distribution network or directly to your television/receiver.

4.3. Stroomaansluiting

Sluit de stroomkabel aan op de amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.

Voorkant view of the Televes 5363 amplifier showing the power input and general casing.

Figuur 3: Voorzijde view of the Televes 5363 Multiband Amplifier, showing the power input.

5. Bediening

De Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.

5.1. Signal Mixing

De amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.

5.2. Aanpassing van de versterking

De amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.

6. Onderhoud

To ensure optimal performance and longevity of your Televes 5363 Multiband AmpVolg voor de versterker deze eenvoudige onderhoudsrichtlijnen:

  • Schoonmaak: Maak de buitenkant van de auto regelmatig schoon. ampReinig de reiniger met een zachte, droge doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
  • Ventilatie: Zorg ervoor dat de ventilatieopeningen vrij zijn van stof en obstakels om oververhitting te voorkomen.
  • Verbindingen: Controleer regelmatig alle kabelverbindingen om er zeker van te zijn dat ze goed vastzitten en vrij zijn van corrosie.
  • Omgeving: Houd de ampPlaats de versterker in een droge, koele omgeving, uit de buurt van direct zonlicht en extreme temperaturen.

7. Probleemoplossing

If you encounter issues with your Televes 5363 Multiband Amplifier, raadpleeg de volgende veelvoorkomende problemen en oplossingen:

  • Geen signaal:
    • Check all cable connections to ensure they are properly seated.
    • Controleer of de amplifier is receiving power (check power indicator light if available).
    • Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
  • Weak or Poor Quality Signal:
    • Check the quality of the input signals before they reach the ampverliezer.
    • Ensure all connections are tight and free from damage or corrosion.
    • Controleer of de amplifier's gain settings (if adjustable) are appropriate for your installation.
  • Geen stroom:
    • Check the power cable connection to both the amplifier and the electrical outlet.
    • Test het stopcontact met een ander apparaat om er zeker van te zijn dat het werkt.

If the problem persists after attempting these solutions, contact qualified technical support.

8. Technische specificaties

FunctieSpecificatie
Modelnummer5363
FabrikantTelevisie
Materiaalzamak
Aantal ingangen2 (VHF/UHF, SAT)
Output Level (Vs)124 dBuV
Gain (SAT)45dB
FrequentiebereikUp to 2150 MHz (FI)
MontagetypeOppervlaktemontage
Afmetingen (L x B x H)180x110x55mm
Productgewicht950 gram
StroomvoorzieningSwitched-mode power supply (internal)
Batterijen vereistNee

9. Garantie en ondersteuning

This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes webplaats.

For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes webplaats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.