1. Inleiding
Thank you for choosing the tectake Ergonomic Office Chair Model 400585. This chair is designed to provide superior comfort and support for long hours of work or study, featuring thick padding, ergonomic armrests, and adjustable functions. This manual will guide you through the assembly, operation, and maintenance to ensure you get the most out of your new office chair.
Image 1.1: The tectake Ergonomic Office Chair Model 400585 in a typical office environment.
2. Veiligheidsinformatie
Please read all safety instructions carefully before assembling and using the chair. Failure to follow these instructions may result in injury or damage to the product.
- Maximale laadcapaciteit: Overschrijd het maximale draagvermogen niet 150 kg (330 lbs).
- Stabiel oppervlak: Always ensure the chair is placed on a stable and flat surface to prevent tipping.
- Montage: Assemble the chair according to the instructions provided. Ensure all screws and bolts are securely tightened before use.
- Kinderen: Houd kinderen uit de buurt van de montageplek. Kleine onderdelen kunnen verstikkingsgevaar opleveren.
- Bewegende onderdelen: Be cautious of moving parts during adjustment to avoid pinching.
- Inspectie: Periodically check all connections and moving parts for wear or damage. Do not use the chair if any components are damaged.
3. Inhoud van het pakket
Controleer vóór de montage of alle onderdelen aanwezig en onbeschadigd zijn. Neem contact op met de klantenservice als er onderdelen ontbreken of beschadigd zijn.
- Zitkussen
- rug
- Armleuningen (2)
- Gasliftcilinder
- Sterbasis
- Wielen (5)
- Mechanisme Plaat
- Montageset (schroeven, ringen, inbussleutel)
- Gebruiksaanwijzing
Image 3.1: Product information and dimensions, including seat surface, backrest height, and overall measurements.
4. Montage-instructies
Assembly is straightforward and typically takes about 20 minutes. Two tools are included for your convenience. It is recommended to have assistance for attaching the armrests.
- Bevestig de wielen aan de sterrenbasis: Insert each of the five casters into the holes at the end of the star base legs. Push firmly until they click into place.
- Gaslift invoegen: Plaats de gasveer in het middelste gat van de stervoet.
- Bevestig de mechanismeplaat aan de stoel: Align the mechanism plate with the screw holes on the underside of the seat cushion. Ensure the front of the mechanism plate faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Bevestig de armleuningen aan de zitting en rugleuning: Position the armrests on the sides of the seat cushion, aligning the holes. Secure the armrests to the seat using screws. Then, align the backrest with the upper holes of the armrests and the back of the seat. Secure the backrest to the armrests and seat. Note: It may require some force to align the holes correctly, especially for the backrest. Screw gradually and evenly on both sides.
- Bevestig de stoelconstructie aan de gaslift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the central hole of the mechanism plate aligns with the top of the gas lift.
Once assembled, ensure all connections are tight and the chair feels stable before use.
5. Gebruiksaanwijzing
Your tectake office chair offers several adjustment features to customize your seating experience for optimal comfort and ergonomic support.
5.1 Hoogteverstelling
Om de zithoogte aan te passen:
- Om te verhogen: While standing, pull the lever located on the right side of the seat upwards. The seat will rise automatically. Release the lever when the desired height is reached.
- Om te verlagen: While seated, pull the lever located on the right side of the seat upwards. The seat will lower. Release the lever when the desired height is reached.
5.2 Tilt Mechanism and Tension Adjustment
The chair features a continuous tilt mechanism that allows the backrest and seat to recline together. The tension of this tilt can be adjusted to suit your weight and preference.
- To activate/deactivate tilt: Pull the same lever used for height adjustment outwards to enable the tilt function. Push it inwards to lock the chair in an upright position.
- Om de kantelspanning aan te passen: Rotate the round knob located underneath the front of the seat. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
5.3 Ergonomische ondersteuning
The chair's design, including the padded backrest and headrest, provides ergonomic support to promote a healthy posture and reduce fatigue during extended use.
5.4 Video Demonstration of Adjustments
Video 5.1: This video demonstrates the height adjustment and reclining features of the tectake office chair.
6. Onderhoud en verzorging
Proper care will extend the life and appearance of your tectake office chair.
- Schoonmaak: The synthetic leather material should be dry cleaned. For minor spills, wipe immediately with a soft, damp Reinig met een doek en milde zeep en droog het vervolgens grondig af. Vermijd agressieve chemicaliën of schurende reinigingsmiddelen.
- Regelmatige inspectie: Controleer regelmatig alle schroeven en bouten om er zeker van te zijn dat ze nog goed vastzitten. Draai ze indien nodig opnieuw vast.
- Smering: If the tilt mechanism or casters begin to squeak, a small amount of silicone-based lubricant can be applied to the moving parts.
- Vermijd direct zonlicht: Prolonged exposure to direct sunlight can cause the synthetic leather to fade or crack.
7. Probleemoplossing
Hier zijn oplossingen voor veelvoorkomende problemen die u met uw bureaustoel kunt tegenkomen:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Stoel is niet in hoogte verstelbaar | Gas lift cylinder is faulty or lever is not engaged correctly. | Ensure the lever is fully pulled up. If the issue persists, the gas lift may need replacement. Contact support. |
| De stoel wiebelt of is instabiel. | Losse schroeven of oneffen vloer. | Check and tighten all assembly screws, especially those connecting the armrests and mechanism plate. Ensure the chair is on a flat surface. |
| Squeaking noise during movement | Friction in moving parts (e.g., tilt mechanism, casters). | Apply a small amount of silicone-based lubricant to the pivot points of the tilt mechanism and caster stems. |
| Wielen rollen niet soepel | Vuil dat vastzit in de wielen of versleten wielen. | Clean any hair or debris from the caster wheels. If casters are worn, they may need replacement. |
| Tilt mechanism is too stiff or too loose | De kantelspanningknop moet worden afgesteld. | Rotate the tilt tension knob underneath the seat to increase or decrease resistance. |
8. Specificaties
Detailed technical specifications for the tectake Ergonomic Office Chair Model 400585.
| Functie | Detail |
|---|---|
| Modelnaam | 400585 |
| Merk | tectake |
| Kleur | Zwart |
| Materiaal | Synthetic Leather (Upholstery), Metal (Frame) |
| Vulmateriaal | Vulling |
| Productafmetingen (D x B x H) | 52P x 49l x 50H cm (diepte x breedte x hoogte) |
| Zitdiepte | 49cm |
| Zithoogte (verstelbaar) | 42-50cm |
| Breedte rugleuning | 52cm |
| Rugleuning Hoogte | 75cm |
| Artikelgewicht | 16 kilogram |
| Maximaal aanbevolen gewicht | 150 kilogram |
| Speciale kenmerken | Ergonomic, Padded, Headrest Support, Swivel, Tilt Mechanism |
| Montage vereist | Ja |
| Onderhoudsinstructies | Chemisch reinigen |
Image 8.1: The tectake office chair's design and comfort features in an office environment.
9. Garantie en ondersteuning
tectake stands behind the quality of its products. For specific warranty information, please refer to the documentation included with your purchase or visit the official tectake webplaats.
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact tectake customer support through the retailer where you purchased the product or directly via the contact information provided on the tectake webplaats.
Zorg ervoor dat u het modelnummer (400585) en uw aankoopbewijs bij de hand hebt wanneer u contact opneemt met de ondersteuning.