Naturewater 3/4-inch Single-Stage Water Filter Instruction Manual

1. Product voorbijview

This Naturewater single-stage water filter system is designed for quick and simple treatment of lightly contaminated drinking water. It effectively filters sand, rust, algae, and other suspended particles. The system is supplied with a 5 µm activated carbon block cartridge, which is highly effective in removing impurities while largely preserving the natural mineral content of the water, as it does not utilize RO membranes or ion exchangers. The 10-inch (254 mm) filter cartridges are easily replaceable, allowing for customization with various filtration materials as needed.

• Reliably removes sand, rust, algae, and suspended particles.
• Maintains essential natural mineral content.
• 10-inch (254 mm) filter inserts are replaceable as needed.
• Features a DN20 (3/4″) connection for water supply networks.

2. Veiligheidsinstructies

Lees alle veiligheidsinstructies zorgvuldig door vóór installatie en gebruik. Het niet opvolgen van deze instructies kan leiden tot materiële schade of letsel.

• Always shut off the main water supply before installing or servicing the filter.
• Release pressure from the system before opening the filter housing.
• Zorg ervoor dat alle verbindingen goed zijn afgedicht om lekkage te voorkomen.
• Do not install the filter in direct sunlight or in areas exposed to freezing temperatures.
• Use only genuine Naturewater replacement cartridges to ensure optimal performance and safety.
• Buiten bereik van kinderen houden.

3. Inhoud van het pakket

Controleer of alle onderdelen aanwezig en onbeschadigd zijn voordat u met de installatie begint.

• 1x Water Filter Housing (3/4-inch)
• 1x 10-inch (254 mm) Filter Insert (5 µm Sediment Cartridge)
• 1x Filter Wrench
• 1x Mounting Bracket (if included in specific package)

4. Installatie en installatie

The Naturewater single-stage filter can be installed under a sink or on a countertop. Ensure you have the necessary tools (e.g., pipe wrench, Teflon tape) before starting.

1. Bereid het installatiegebied voor: Choose a location that is easily accessible for filter changes and protected from freezing. Ensure there is enough space for the filter housing (dimensions: 13.5L x 13.5W x 33H cm).
2. Sluit de watertoevoer af: Turn off the main water supply valve to your home or the specific line where the filter will be installed. Open a nearby faucet to relieve pressure.
3. Mount the Filter Housing: Use the provided mounting bracket (if applicable) to securely attach the filter housing to a sturdy surface. Ensure the housing is vertical.
4. Waterleidingen aansluiten: Identify the "IN" (inlet) and "OUT" (outlet) ports on the filter head. Apply Teflon tape to the threaded connections of your water lines and connect them to the corresponding ports. The filter uses DN20 (3/4-inch) connections. Tighten connections securely but do not overtighten.
5. Filterpatroon plaatsen: Unscrew the clear housing from the blue filter head using the filter wrench. Remove the protective wrapping from the 5 µm sediment cartridge and carefully insert it into the clear housing. Ensure it is seated correctly.
6. Behuizing opnieuw in elkaar zetten: Screw the clear housing back onto the filter head. Hand-tighten first, then use the filter wrench for a final snug turn. Do not overtighten.
7. Herstel de watertoevoer en controleer op lekkages: Slowly turn on the main water supply. Check all connections for leaks. If leaks occur, tighten the connections slightly.
8. Spoel het systeem: Open a filtered water faucet and let the water run for 5-10 minutes to flush out any air and fine carbon particles. The water may appear cloudy initially; this is normal.

5. Gebruiksaanwijzing

Once installed and flushed, the Naturewater single-stage filter operates automatically. Water flows through the filter, and impurities are removed by the cartridge.

• The filter is designed for continuous use with potable water.
• No special adjustments are required during normal operation.
• The clear housing allows for visual inspection of the filter cartridge's condition.

6. Onderhoud

Regular filter cartridge replacement is crucial for maintaining water quality and system performance.

6.1 Vervanging van het filterpatroon

The 10-inch (254 mm) filter cartridge should be replaced every 3-6 months, or sooner if you notice a significant drop in water pressure or taste/odor issues. Replacement frequency depends on water quality and usage.

1. Sluit de watertoevoer af: Turn off the main water supply valve to the filter.
2. Druk verlichten: Press the red pressure release button on top of the filter head (if present) to release trapped air and water pressure.
3. Schroef de behuizing los: Place a bucket underneath the filter to catch any dripping water. Use the filter wrench to unscrew the clear housing.
4. Oude cartridge verwijderen: Verwijder voorzichtig de oude filtercartridge en gooi deze op de juiste manier weg.
5. Schone huisvesting: Clean the inside of the clear housing with warm, soapy water and rinse thoroughly. Inspect the O-ring for any damage; replace if necessary. Lubricate the O-ring with food-grade silicone grease if it appears dry.
6. Nieuwe cartridge plaatsen: Remove the protective wrapping from the new 10-inch (254 mm) filter cartridge and insert it into the housing, ensuring it is properly seated.
7. Behuizing opnieuw in elkaar zetten: Screw the clear housing back onto the filter head. Hand-tighten, then use the filter wrench for a final snug turn.
8. Herstel de watertoevoer en spoel door: Slowly turn on the water supply. Check for leaks. Flush the system by running water for 5-10 minutes to remove air and fine particles from the new cartridge.

7. Probleemoplossing

8. Specificaties

9. Garantie en ondersteuning

For warranty information or technical support, please refer to the retailer's policy or contact Naturewater customer service. Keep your purchase receipt as proof of purchase.

Online hulp: Visit the official Naturewater website voor veelgestelde vragen en aanvullende informatie.