Invoering
The Strymon El Capistan dTape Echo pedal is designed to emulate the natural warmth and unique sonic characteristics of classic tape delay units. Utilizing advanced SHARC DSP technology, it offers three distinct tape machine styles and a wide range of adjustable parameters, along with bonus features like onboard spring reverb and a sound-on-sound looper. This manual provides detailed instructions for setting up and operating your El Capistan pedal.
Belangrijkste kenmerken
- Five tape adjustment and tone shaping knobs: Time, Mix, Tape Age, Repeats, Wow & Flutter.
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters.
- 115dB typical signal to noise ratio.
- Super high performance DSP in a compact form factor.
- True Bypass (electromechanical relay switching).
Instellen
To set up your Strymon El Capistan pedal, follow these steps:
- Stroomaansluiting: Connect a 9V DC power supply (center-negative, 100mA minimum) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the specified requirements to prevent damage.
- Ingangsverbinding: Connect your instrument (e.g., guitar) to the INPUT jack on the rear of the pedal using a standard 1/4-inch instrument cable.
- Uitgangsverbinding: Connect the LEFT OUT and/or RIGHT OUT jacks to your amplifier or audio interface using 1/4-inch instrument cables. For mono operation, use the LEFT OUT jack. For stereo operation, use both LEFT OUT and RIGHT OUT.
- Expressiepedaal (optioneel): An optional expression pedal can be connected to the EXP jack for real-time control over various parameters.
Gebruiksaanwijzing
The El Capistan offers a comprehensive set of controls to shape your tape echo sound. Familiarize yourself with the primary and secondary functions of each control.
Primaire controles
- TIJD: Controls the delay time of the echo repeats.
- MENGEN: Adjusts the wet/dry ratio of the effect. Turn clockwise for more effect, counter-clockwise for less.
- TAPE AGE: Controls the bandwidth of the tape, simulating the degradation of older tape.
- HERHALINGEN: Controls the feedback of the delay, determining the number of repeats.
- WAUW & FLUTTER: Controls the amount of mechanically related tape speed fluctuations, adding vintaghet karakter.
- TAPE HEAD Switch: Selects between three tape head configurations: Fixed, Multi, and Single.
- MODE-schakelaar: Selects between three different tape machine modes (A, B, C), each with unique characteristics.
- TAP-voetschakelaar: Tap twice to set the delay time. Hold to engage the Sound-on-Sound Looper.
- BYPASS-voetschakelaar: Schakelt het effect in of omzeilt het.
Secondary Controls (Hidden Parameters)
The El Capistan features secondary functions accessible by holding both footswitches while powering on, or by holding the TAP footswitch and turning a knob. Refer to the full user manual for detailed instructions on accessing and adjusting these parameters.
- TIME (Secondary): Controls the spring reverb mix.
- MIX (Secondary): Controls a +/- 3dB boost/cut.
- REPEATS (Secondary): Controls the tape bias.
- TAPE AGE (Secondary): Controls the low-end contour.
- WOW & FLUTTER (Secondary): Controls the amount and severity of tape irregularities.
Onderhoud
To ensure the longevity and optimal performance of your El Capistan pedal:
- Houd het pedaal schoon en stofvrij. Gebruik een zachte, droge doek om het schoon te maken.
- Vermijd blootstelling van het pedaal aan extreme temperaturen, hoge luchtvochtigheid of direct zonlicht.
- Do not attempt to open the enclosure or modify the internal components, as this will void the warranty.
- Always use the correct power supply (9V DC, center-negative, 100mA minimum) to prevent electrical damage.
Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Geen geluid of zwak signaal | Onjuiste kabelaansluitingen, defecte kabels, onjuiste stroomvoorziening, pedaal niet ingeschakeld. | Check all cable connections (input/output). Ensure cables are not damaged. Verify power supply specifications. Press the BYPASS footswitch to engage the effect. |
| Ongewenst geluid of gezoem | Aardlus, defecte voeding, interferentie van andere elektronica. | Use an isolated power supply. Try a different power outlet. Move the pedal away from other electronic devices. |
| Effect not working as expected | Incorrect knob settings, secondary functions engaged unintentionally. | Review the operating instructions for knob functions and switch settings. Reset the pedal to factory defaults if necessary (refer to the full user manual for this procedure). |
| Voetschakelaar reageert niet | Internal issue, debris under footswitch. | Ensure the pedal is powered correctly. If the issue persists, contact Strymon support. |
Specificaties
- Merk: Strymon
- Modelnaam: El Kapistan
- Modelnummer: Elcapistan
- Stijl: Delay, Looper, Reverb
- Kleur: Black, Gray, Silver
- Deeltage: 9 Volt
- Amptijdperk: 100 milliamps
- Audio Output Effects: Vertraging
- Bedieningstype: Knop
- Energiebron: Elektrische kabel
- Hardware-interface: 1/4-inch audio
- Signaalformaat: Analoog
- Afmetingen artikel: 8 x 8 x 5 inch
- Aansluittype: 1/4 inch (6.35 mm) audio-aansluiting
- UPC-nummer: 852636007232
- Meegeleverde componenten: Sound-on-Sound Looper, Onboard Spring Reverb
Garantie en ondersteuning
Strymon products are designed for reliability and performance. For warranty information, product registration, or technical support, please visit the official Strymon webwebsite of neem contact op met hun klantenservice. Bewaar uw aankoopbewijs voor garantieclaims.