Progress Lighting P3597-09 Semi-Flush Fixture Instruction Manual

1. Inleiding

Thank you for choosing the Progress Lighting P3597-09 Semi-Flush Fixture. This fixture is part of the North Park Collection, offering a modern interpretation of the classic Craftsman style with clean linear forms and square etched glass. It is designed to provide a softly diffused lighting effect and can be installed as either a close-to-ceiling or a hanging fixture, with all necessary hardware included. This manual will guide you through the installation, operation, and maintenance of your new lighting fixture.

Figure 1.1: The P3597-09 fixture shown in its semi-flush mounting configuration. It features a brushed nickel finish and square etched glass, embodying a Craftsman and Mission design blend.

2. Veiligheidsinformatie

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage to property. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.

• Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Sluit dit apparaat niet aan op een ongeaard elektrisch systeem.
• Overschrijd het maximale wattage niet.tage specified for the bulbs (2 x 100-Watt medium base bulbs).
• Ga voorzichtig om met glazen onderdelen om breuk te voorkomen.
• Zorg ervoor dat alle aansluitingen goed vastzitten en goed geïsoleerd zijn.

3. Inhoud van het pakket

Carefully unpack your fixture and identify all parts. Keep the packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to install the fixture.

• Fixture Body with Brushed Nickel Finish
• Square Etched Glass Shade
• Montagemateriaal (dwarsbalk, schroeven, draadklemmen)
• Chain (for hanging installation option)
• Ceiling Mount Canopy (for semi-flush installation option)
• Gebruiksaanwijzing

4. Installatie en installatie

This fixture offers two installation options: semi-flush mount or hanging with a chain. Choose the appropriate method for your space.

4.1. Pre-installatie

1. Schakel de stroom uit bij de stroomonderbreker.
2. Remove existing fixture (if applicable).
3. Identify supply wires: black (hot), white (neutral), and green or bare copper (ground).

4.2. Semi-Flush Mount Installation

1. Bevestig de montagedwarsbalk aan de aansluitdoos met behulp van de meegeleverde schroeven.
2. Connect the fixture's ground wire to the supply ground wire using a wire nut.
3. Connect the fixture's white wire to the supply white (neutral) wire.
4. Connect the fixture's black wire to the supply black (hot) wire.
5. Steek alle draden voorzichtig in de contactdoos.
6. Align the fixture's canopy with the mounting screws on the crossbar and secure it in place.
7. Attach the etched glass shade to the fixture body according to the specific design (usually by twisting or securing with decorative nuts).

Figuur 4.1: Een gedetailleerde view of the brushed nickel finish and the connection point for the etched glass shade, illustrating the quality of the material and craftsmanship.

4.3. Hanging Fixture Installation (with Chain)

1. Follow steps 1-5 from the Semi-Flush Mount Installation.
2. Bepaal de gewenste ophanglengte en pas de ketting daarop aan.
3. Thread the fixture's electrical wires through the chain and the canopy.
4. Secure the chain to the mounting loop on the crossbar and to the fixture body.
5. Slide the canopy up the chain and secure it to the ceiling, covering the outlet box.
6. Attach the etched glass shade to the fixture body.

Figure 4.2: The P3597-09 fixture configured for hanging installation, showcasing the included chain and how it integrates with the fixture's design.

Figuur 4.3: Een close-up view of the chain's connection point to the fixture's top canopy, demonstrating the secure and integrated design for hanging applications.

5. Gebruiksaanwijzing

Once the fixture is securely installed and wired, you can begin operation.

1. Lampen installeren: Insert two (2) 100-Watt maximum medium base (E26) incandescent bulbs into the sockets. Ensure bulbs are fully seated.
2. Herstel de stroom: Schakel de stroom weer in via de hoofdschakelaar.
3. Licht activeren: Use the wall switch connected to the fixture to turn the light on and off.

The etched glass shade provides a softly diffused light, ideal for various indoor settings.

6. Onderhoud

Regelmatig onderhoud helpt om het uiterlijk en de functionaliteit van uw armatuur te behouden.

• Schoonmaak: To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the etched glass, a slightly damp Je kunt een doek gebruiken, gevolgd door een droge doek.
• Lamp vervangen: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with bulbs of the same type and wattage (2 x 100-Watt max, medium base).
• Inspectie: Controleer periodiek de bedrading en aansluitingen op slijtage of beschadigingen. Raadpleeg een gekwalificeerde elektricien als u problemen constateert.

7. Probleemoplossing

Als uw armatuur niet naar behoren werkt, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:

If the problem persists after trying these solutions, please contact a qualified electrician or Progress Lighting customer support.

8. Specificaties

Detailed technical specifications for the P3597-09 fixture:

Figure 8.1: Dimensional diagram of the P3597-09 fixture, indicating a width of 12-3/4 inches and a height of 13-5/8 inches.

9. Garantie en ondersteuning

Progress Lighting offers a 1-Year Limited Warranty on this product, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the contact information provided on the product packaging or the official Progress Lighting webplaats.

Fabrikant: Vooruitgangsverlichting
Plaats van vestiging: GREENVILLE, SC, 29607 US