Invoering
The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.
Veiligheidsinformatie
WAARSCHUWING: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.
- Zorg ervoor dat de stroom is uitgeschakeld vóór installatie.
- Volg alle lokale en nationale elektrische voorschriften.
- Dit apparaat is uitsluitend bedoeld voor gebruik binnenshuis.
Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:
- Intermatic SS7C Digital Wall Switch Timer Unit
- Montageschroeven
- Draadmoeren
- Gebruiksaanwijzing (dit document)
Instellen en installeren
Benodigde gereedschappen: Screwdriver, Wire Strippers, Electrical Tape.
- Schakel de stroom uit: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltagen tester.
- Bestaande schakelaar verwijderen: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
- Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
Afbeelding: Voorzijde view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.
- Lijndraad: Connect to the timer's LINE terminal.
- Laaddraad: Connect to the timer's LOAD terminal.
- Aardingsdraad: Connect to the timer's GROUND terminal.
- Neutrale draad (indien van toepassing): Some installations may require a neutral wire. Consult your local electrical codes.
- Monteer de timer: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
- Herstel de stroom: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.
Bediening en programmering
The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.
1. De huidige tijd en dag instellen
- Druk op de KLOK knop. De tijdweergave zal knipperen.
- Gebruik de UUR En MINUUT knoppen om de huidige tijd aan te passen.
- Druk op de DAG knop om de huidige dag van de week in te stellen.
- Pers KLOK again to save and exit, or wait a few seconds for it to save automatically.
2. Programming ON/OFF Events
The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.
- Druk op de PROG knop. Op het display verschijnt "1 AAN".
- Gebruik UUR, MINUUT, En DAG buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
- Pers PROG Opnieuw. Op het display verschijnt "1 UIT".
- Set the desired OFF time and day(s) for Program 1 using the UUR, MINUUT, En DAG knoppen.
- Herhaal stappen 1-4 voor extra programma's (2 AAN/UIT tot en met 6 AAN/UIT).
- Nadat u alle gewenste programma's hebt ingesteld, drukt u op KLOK om terug te keren naar de normale werking.
3. Handmatige opheffing
To manually turn the connected device ON or OFF outside of programmed times, press the AAN/UIT button. This will temporarily override the current program until the next scheduled ON or OFF event.
4. Random Setting Feature
The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.
Onderhoud
The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.
- Batterij vervangen: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
- Schoonmaak: Clean the timer's surface with a soft, damp doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Timer schakelt niet AAN/UIT op de geprogrammeerde tijden. | Incorrect programming; Manual override active; Power interruption. | Review programming steps. Ensure manual override is not active. Check power supply. |
| Het scherm is leeg of donker. | No power to the unit; Internal battery low. | Check circuit breaker. If power is present, the internal battery may need replacement. |
| Programming is lost after power outage. | De interne batterij is leeg of defect. | The internal battery needs replacement. Contact support if within warranty. |
| Connected device does not respond. | Incorrect wiring; Faulty device; Overload. | Verify wiring connections. Test the connected device independently. Ensure load does not exceed timer's rating. |
Specificaties
- Merk: Intermatisch
- Modelnummer: SS7C
- Artikelgewicht: 0.35 pond
- Aantal instellingen: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
- Schermgrootte: 1.5 inch
- Kleur: Wit
- Fabrikant: INTERMATIC INC
- UPC-nummer: 078275056732
- ASIN: B0000BYDA2
Garantie en ondersteuning
This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1 jaar beperkte fabrieksgarantie vanaf de aankoopdatum. Deze garantie dekt defecten in materialen en vakmanschap bij normaal gebruik.
For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.
For the most up-to-date support information, please visit the official Intermatic webwebsite of raadpleeg de contactgegevens die u bij uw productverpakking vindt.